Filter
Top Products
4200-A2-GB20-00 August 2002
2-1
2
Using the Command Line Interface
Overview
The Command Line Interface (CLI) is accessible via either a directly connected
terminal session or a Telnet connection. You can use the CLI to:
Change the operational characteristics of the device by setting configuration
values
Display system status
Perform diagnostics
The system supports multiple simultaneous CLI sessions.
TL1 Command Language
The GranDSLAM 4200 uses Transaction Language No. 1 (TL1) commands since it
is a universal language and is familiar to many network users.
The TL1 command is in the following general format:
COMMAND_CODE:[STAGING PARAMETERS]::<DATA_PARAMETERS>;
where:
The colon (:) is the data block delimiter.
The semicolon (;) is the input command terminator.
Square brackets ([ ]) designate that the enclosed value is optional.
Angled brackets (< >) indicate that the enclosed words describe part of the
command.