Filter
Top Products
14. System Commands
14-26
August 2002 4200-A2-GB20-00
Table 14-22. RTRV-NE-ALL Response Parameters (1 of 3)
Parameter Explanation
sid Source NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A,
Error Codes
)
aid_com As described for command parameters (see Table 14-21, RTRV-NE-ALL
Command Parameters).
ne_nblk Named parameter block for NE. The block consists of one or more of
the following parameters, each followed by an equal sign and a value.
BOOTPVCI : ATM VCI of the PVC over which the NE issues BOOTP
requests for ATM-1 (32−65535).
BOOTPVPI: ATM VPI of the PVC over which the NE issues BOOTP
requests for ATM-1 (0−4095)
MEMALM: Status of alarm condition indicating loss or corruption of
persistent memory. Values are:
– ACTIVE: Persistent memory lost or corrupted
– CLEAR: Persistent memory OK
DEFROUTER: IP address of default IP router. Values are:
– ddd.ddd.ddd.ddd: IP address (ddd = 1−255)
– NONE: No default IP router is used
NETPOS: Position of the NE in the access subnetwork. Value is HUB
(NE is directly connected to the network).
SNTP: Use of Simple Network Time Protocol to maintain NE clock.
Values are:
– ENABLED: Use SNTP
– DISABLED: Use NE local time set by the SET-DAT command
TZOFFSET: Offset of local time zone from GMT/UTC, in minutes
(-780−780). Used by the system if SNTP is enabled.
MEMDNLD: Whether external download of a system persistent
database is enabled. Value is ENABLED (download allowed).