Filter
Top Products
C. Traps and MIBs
4200-A2-GB20-00 August 2002
C-7
MIB II (RFC 1213)
The objects defined by MIB II (RFC 1213) are organized into the following groups:
System Group
(see
MIB II (RFC 1213) System Group
)
IP Group
– Supported at a minimum. No tables or objects containing an IP
address are supported.
SNMP Group
– Objects that apply to a management agent are fully
supported:snmpInPkts (snmp1), snmpOutPkts (snmp2), snmpInBadVersions
(snmp3, snmpInBadCommunityUses (snmp5), snmpInASNParseErrs
(snmp6), snmpInTotalReqVars (snmp13), snmpInTotalSetVars (snmp 14),
snmpInGetRequests (snmp15), snmpInGetNexts (snmp 16),
snmpInSetRequests (snmp 17), snmpInGetResponses (snmp 18),
snmpInTraps (snmp 19), snmpOutTooBigs (snmp 20),
snmpOutNoSuchNames (snmp21), snmpOutBadValues (snmp21),
snmpOutGenErrs (snmp24), snmpOutGetResponses (snmp28),
snmpOutTraps (snmp29), and snmpEnableAuthenTraps (snmp30).
MIB II (RFC 1213) System Group
System Group objects are fully supported by the GranDSLAM 4200, as shown in
Table C-2, System Group Objects.
Table C-2. System Group Objects (1 of 2)
Object Description Setting/Contents
sysDescr
(system 1)
Provides a full name and
version identification for the
GranDSLAM system’s
hardware and software.
The object is set to display a string in the following format:
Paradyne Ubiquity ATM Stackable DSLAM; Model:
xxxx
;
S/W Release:
yy.yy.yy;
CCA number: zzzz-
zzz;
Serial number:
sssssss
;
Where:
xxxx
: Full model number of the unit
yy.yy.yy
: Software revision number
zzzz-zzz
: Hardware revision number of the parentboard
sssssss
: Unit serial number
sysObjectID
(system 2)
Identifies the network
management subsystem for
the GranDSLAM 4200.
OIDs (Object Identifiers):
atm-stackable: [company enterprise OID].1.14.18
atms:stack – [company enterprise OID].1.14.18.1
atms:4200 – [company enterprise OID].1.14.18.1.1
sysUpTime
(system 4)
Provides the time (in hundreths
of a second) since the network
management portion of the
system was last reinitialized.
ASCII character string (32 characters), as set by the user.
badValue(3)
– Field length exceeded.
sysContact
(system 4)
Provides the contact
information for the person
managing the node.
ASCII character string (32 characters), as set by the user:
badValue(3)
– Field length exceeded.
sysName
(system 5)
Provides a contact name for
the node.
ASCII character string (32 characters), as set by the user:
badValue(3)
– Field length exceeded.