Filter
Top Products
12. Security Commands
12-2
August 2002 4200-A2-GB20-00
DLT-USER-SECU
The DLT-USER-SECU command deletes a user account from the NE database.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* DLT-USER-SECU:[tid]:uid:[ctag] */
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* DLT-USER-SECU:[tid]:uid:[ctag] */
aid:ERRCDE=errcde
/* error description */
;
Table 12-1. DLT-USER-SECU Command Parameters
DLT-USER-SECU:[tid]:uid:[ctag][:];
RESTRICTIONS: All parameters in this command are position-defined. At leased one
superuser account must remain at all times.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
uid User identification name (10 characters maximum). Input is
case-sensitive. Grouping is allowed. ALL is not supported.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.