Filter
Top Products
3. ADSL Facility Commands
4200-A2-GB20-00 August 2002
3-41
Example
Retrieve profile 5.
RTRV-PROFILE-ADSL:TAMPA:5:42;
TAMPA 02-07-24 12:30:43
M 42 COMPLD
/* RTRV-PROFILE-ADSL:TAMPA:5:42 */
5:LOCAL:TAMPA101:CONFIG
;
Related Commands
ACT-PROFILE-ADSL
on page 3-2
DLT-PROFILE-ADSL
on page 3-6
ENT-PROFILE-ADSL
on page 3-24
Table 3-32. RTRV-PROFILE-ADSL Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
adsl_profile_id As described for command parameters, except that ALL is not used
profile_name Name (32 characters maximum) that uniquely identifies the profile
within its scope
profile_scope As described for command parameters
latency Latency of the ADSL line. Only single latency is supported upstream
and downstream. The valid value is FAST (only ADSL FAST supported).
profile_state State of the profile (ADSL profiles only). Values are:
CONFIG: Profile is currently being created. It can be configured, but not
used.
ACTIVE: Profile has been activated and is ready for use and is
configured.
errcde Error code (see Appendix A,
Error Codes
)