Filter
Top Products
5. ATM Commands
4200-A2-GB20-00 August 2002
5-17
Table 5-14. RTRV-ATMACC Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
atmacc_profile_id As described for command parameters (see Ta bl e 5 - 13 ,
RTRV-PROFILE-ATMACC Command Parameters), except ALL is not
used.
profile_scope As described for command parameters (see Ta bl e 5 - 13 ,
RTRV-PROFILE-ATMACC Command Parameters).
profile_name A string of characters (32 maximum) that uniquely identifies the
profile within its scope. Default for LT=1. Default for NT=2.
atmacc_nblk ATM access profile parameter block containing one or more of the
following named parameters (separated by commas):
MAXPCS: Maximum number of virtual path circuits supported. Values
are:
– NT: 0
– LT: 0
MAXVCCS: Maximum number of virtual channel circuits supported.
Maximum values are:
– NT: 97
– LT: 4
VPIBITS: Number of active VPI bits (0−10). Default values are:
– NT: 4
– LT: 1
VCIBITS: Number of active VCI bits (0−10). Default values are:
– NT: 10
– LT: 6
errcde Error code (see Appendix A,
Error Codes
).