Filter
Top Products
10. Fault Commands
10-30
August 2002 4200-A2-GB20-00
Example
Retrieve near-end loss-of-signal condition of ADSL line for rack 1, shelf 1, slot 1,
circuit 3.
RTRV-COND-ADSL:TAMPA:ADSL-1-1-1-3:42::LOS,NEND;
TAMPA 02-06-29 11:36:43
M 42 COMPLD
/* RTRV-COND-ADSL:RALGH:ADSL-1-1-1-3:42::LOS,NEND, */
"ADSL-1-1-1-3,ADSL:MN,LOS,NSA,,,NEND,,,Loss of Signal"
;
Related Commands
None
[ntfncde] Notification code. Valid values are:
CR: Critical alarm
MJ: Major alarm
MN: Minor alarm
cond_adsl ADSL Condition. Valid values are:
LORATE: Loss of Signal Quality
LOS: Loss of Signal (Near End only)
LOF: Loss of Frame
LPR: Loss of Power (Far End only)
FACTERM Modem could not initialize (Near End only)
LOL: Loss of Link (Near End only)
LCD: Loss of Cell Delineation (fast) (Near End only)
serveff Service effect. Valid values are:
SA: Service affecting
NSA: Not service affecting
[locn] As described for command parameters (see Table 10-17,
RTRV-COND-ADSL Command Parameters).
[dirn] As described for command parameters (see Table 10-17,
RTRV-COND-ADSL Command Parameters).
[cond_descr] Description of alarm condition.
Table 10-18. RTRV-COND-ADSL Command Parameters (2 of 2)
Parameter Explanation