Filter
Top Products
12. Security Commands
12-12
August 2002 4200-A2-GB20-00
RTRV-CID-SECU
The RTRV-CID-SECU command retrieves the configuration data associated with
the Channel Identifiers (CID).
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-CID-SECU:[tid]:cid:[ctag] */
"cid:chap:cid_nblk"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-CID-SECU:[tid]:cid:[ctag] */
aid:ERRCDE=errcde
/* error description */
;
Table 12-11. RTRV-CID-SECU Command Parameters
RTRV-CID-SECU:[tid]:cid:[ctag][:];
RESTRICTIONS: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
cid Calling address identifier. Valid values are:
CRAFT: Local console interface
REMOTE: Remote console interface
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.