Filter
Top Products
28 COMMANDCENTER NOC ADMINISTRATOR GUIDE
Configure Event Forwarding
This page allows you to configure the events, for example, SNMP traps you want forwarded to
external systems. It also allows you to configure the external systems to forward the events to.
Within event forwarding, you can:
• Configure Event Recipients
• Configure Event Severities to Forward
Configure Event Recipients
To instruct your CC-NOC to forward copies of its events as SNMP traps to other management
platforms or Raritan appliances, use Configure Event Recipients to specify where your events
should be forwarded.
1. Click on the Admin tab in the top navigation bar.
2. Click Multi-site Management.
3. Click Configure Event Forwarding.
4. Click Configure Event Recipients.
Figure 28 Configure Event Recipients
5. Click add recipient.
Figure 29 Adding Event Recipients
6. Click add recipient.
7. Type protocol, host, and port for the Event Receiver which is the destination address of the
management platform or Raritan appliance you are sending the trap to. On this platform or
appliance resides an SNMP agent that listens for the traps. This Host can be either an IP