Filter
Top Products
52 COMMANDCENTER NOC ADMINISTRATOR GUIDE
Load Default Signatures or Settings from Another Appliance
Alternatively, you can quickly configure your Intrusion Detection appliance by selecting a set of
pre-selected signatures appropriate for most networks or by selecting a previously saved
appliance’s signature settings.
10. To load the defaults, select Load defaults from the drop-down selection list and click Load
Configuration.
11. To load a previously saved signature setting from a particular appliance, select the appliance
from the drop-down selection list and click Load Configuration.
Figure 65 Load Intrusion Detection Settings
12. When you have changed the settings to reflect the devices and services on your network,
click Finish.
Delete Intrusion Detection Performance Data
Use this option to delete and reset the intrusion detection performance data for one or more
intrusion detection appliances.
1. Click on the Admin tab in the top navigation bar.
2. Click Intrusion Detection Configuration.
3. Click Delete Performance Information.
Figure 66 Deleting Intrusion Detection Performance Data
4. From the list or appliances, highlight the CC-NOC from the selection box and click delete.
The intrusion detection performance data will be deleted and reset.