Filter
Top Products
RuggedRouter® User Guide
Modem PPP Client Connections
To edit an existing connection, click the “Edit” link for that connection.
To create a new connection click “Add new” link.
To have the router automatically dial a connection at boot time and keep it always
active, select which connection should be used from the drop down list of available
connection profiles in the Connect at boot list.
Modem PPP Client
The Connection Name field determines what name will be used to refer to this
connection when choosing which connection to dial automatically at boot, or which
connection to use as a backup for another link.
The PPP Username field determines the user name to use when connecting to the
PPP server as specified by your network provider. If the username is not required, you
can enter “none” in this field, or leave it blank.
The Password field determines the password to use when connecting to the PPP
server. If the password is not required, you can enter “none” in this field, or leave it
blank.
The Default Route checkbox enables automatically setting a default route using this
interface whenever it connects. If this is your primary connection you probably want
this option enabled.
106 RuggedCom
Figure 96: Modem PPP Client Connections
Figure 97: Configure Modem PPP Client