RuggedCom RX1000 Network Router User Manual


 
Chapter 29 - Maintaining The Router
Chapter 29 - Maintaining The Router
Introduction
This chapter familiarizes the user with:
Viewing Alerts
Configuring and monitoring the Gauntlet Security Appliance
Backing up and restoring configurations
Configuring SNMP
Configuring RADIUS Authentication
Configuring Outgoing Mail
Chassis Parameters
Power over Ethernet
Using System Logs
Upgrading Software
Using Pre-upgrade/Post-upgrade scripts
Uploading and downloading files
Alert System
The alert system provides the following features:
Generates alerts, displaying them locally and/or forward them via
email messages.
Alerts are set and cleared by the daemons that own them. Active
alerts are locally displayed and can be cleared manually.
Multiple forwarders can be configured, a configurable filter level
controls alert forwarding to each forwarder.
By configuring different forwarders, low severity and high severity control
centers can be set up.
Each alert is mapped to an alert definition entry, which is predefined by a daemon
who owns the alert or by a user. All alert definition entries are configurable by user.
An alert filter is a user defined configuration to define the forwarders destination of
active alerts. Any active alerts with Renotify Interval set to non-zero value and
matches with the filter level will be forwarded to the defined forwarder destination.
Alert Main Menu
Figure 222: Alert Main Menu
RuggedCom 253