RuggedCom RX1000 Network Router User Manual


 
Chapter 16 - Configuring Dynamic Routing
Dynamic Routing Configuration
Figure 131: Dynamic Routing Menu
Before dynamic routing protocols can be used, quagga must be enabled in the Bootup
and Shutdown menu.
After quagga is enabled, RIP or OSPF itself must be enabled in the Enable Protocols
menu of Dynamic Routing.
The Core menu configures link related items such as link-detect and link cost.
The RIP and OSPF menu configure these protocols for each interface.
Enable Protocols
Figure 132: Enable Protocols Menu
This menu enables RIP and OSPF for dynamic routing.
RuggedCom 157