RuggedCom RX1000 Network Router User Manual


 
RuggedRouter® User Guide
Configuring remote syslogging
Once a key is successfully obtained from an SEM unit, then remote syslogging to the
SEM can be enabled by clicking on Add remote system logging to the SEM unit.
This will add an entry in the syslog configuration file to transmit system logs to the
configured SEM.
If the SEM unit IP address changes, it will be necessary to change the local
configuration by stopping the idefender process (see Bootup and Shutdown),
configuring and saving the new SEM IP address, and restarting the idefender process.
The above steps takes care of the configuration. All that is left to do now is to start the
Industrial Defender Agent itself by enabling the idefender entry in the Bootup and
Shutdown menu. A properly configured SEM unit will now be receiving data from
the RuggedRouter. Please note that when the idefender process is stopped, the remote
syslog entry to the SEM unit is automatically removed.
260 RuggedCom