Filter
Top Products
iv
●●
Caution
★ Unpack the printer. Make sure that the
printer body and all accessories are
included in the package and no parts are
damaged.
★ Do not use the printer in a location
exposed to direct sunlight or close to a
heater or other heat generating
equipment.
★ Before connecting or disconnecting the
interface cable, be sure to turn off the
printer.
★ Place the printer on a rigid, horizontal
base in a location that is free of vibration.
★ Do not use the printer in a dusty location
or any location subject to sudden
changes in temperature and humidity.
★ Do not connect the printer to a non-
standard power source.
★ Never try to print without a ribbon
cassette installed and paper loaded.
★ Do not turn off the printer during
printing, as this may lead to a
malfunction.
★
Take care not to twist the ribbon while
installing the ribbon cassette.
★
Push the lock levers of both tractors
to the LOCK positions firmly while
loading fanfold paper or single sheet
paper. It is for the purpose of
setting paper path securely.
★
If the case or cover becomes dirty,
clean it with a soft cloth moistened
with a small quantity of neutral
detergent diluted with water. Never
use a hard cloth or volatile solvent
such as alcohol, thinner, or benzine.
★ If any foreign matter gets into the
printer, turn off the printer
immediately and remove the foreign
matter.
Cautions in operation
Safety Cautions
Cautions in setting up
See page 3-1.
CAUTION
!
Caution
Caution
★ Use two hands and hold firmly at each
end when lifting the cut sheet feeder.
Personal injury can occur if the CSF unit
is dropped.
★ Do not touch the print head immediately
after printing because it is too hot.
★ Do not put your finger under the tractor
cover while loading fanfold paper.