Filter
Top Products
—
8. Software commands
—
●
IBM Software commands
ESC \ (27)D (92)D (1B)H (5C)H
All-character set
{0 ≤n1 ≤ 255}{0 ≤n2 ≤255}
n1 n2 n1 n2 n1 n2
Prints n1 + n2 × 256 characters in the all-character character set.
d1 d2 d1 d2 d1 d2
•••dk •••dk •••dk
ESC ] (27)D (93)D (1B)H (5D)H
Reverse line feeding.
This command does not execute a carriage return even when an
automatic carriage return is specified.
ESC ^ (27)D (94)D (1B)H (5E)H
All-character set for a single character.
{0 ≤n ≤ 255}
n n n
Prints only one character following
ESC ^
in the all-character
character set.
ESC _ (27)D (95)D (1B)H (5F)H
Specifies or cancels the upper line.
n n n n = 1
: Specifies the upper line.
n = 0
: Cancels the upper line.
ESC d (27)D (100)D (1B)H (64)H
Specifies the relative printing position.
{0 ≤n1 ≤ 255}{0 ≤n2 ≤255}
n1 n2 n1 n2 n1 n2
Advances the printing position by
(n1+n2
×
256)/120
inch.
ESC j (27)D (106)D (1B)H (6A)H
Stops printing.
After printing, this command activates the buzzer and disables
printing.
Decimal Hex
Symbol
Function
Code
8-17