Filter
Top Products
1-16
—
1. Setting up the printer
—
●
Loading fanfold paper (Rear tractor)
1. Detach the rear printer cover from the
printer.
2. Install the rear tractor, and plug in the
connector.
Dual paper parking is available if the optional rear tractor is used. This funcion
enables two types of fanfold paper of different formats to be set together and
selected with the PAPER PATH key on the printer or by issuing a setup command
from the computer.
1
Leg
Leg
1
Paper setting procedures usig rear tarctor 1
Pull the upper
part of the rear
printer cover to
the front to
detach it from the printer.
When attaching the rear
printer cover, insert
the two legs into the
printer and then press
the rear printer cover
to lock it.