Filter
Top Products
ESC \ (27)D(92)D (1B)H (5C)H
Specifies the relative printing position.
n1 n2 n1 n2 n1 n2
Specifies where to start printing of the next data in relation to
the current position as shown below.
If
(n1+n2
×
256)
is less than
32768 [8000H]
, the printing position
moves to the right of the current position by
(n1+n2
×
256).
If
(n1+n2
×
256)
is equal to or more than
32768 [8000H],
the
printing position moves to the left of the current position by
65536
–
(n1+n2
×
256).
Printing mode Unit of motion
Draft
1/ 120 inch
LQ or proportional
1/ 180 inch
ESC a (27)D(97)D (1B)H (61)H
Selects the printing position adjustment.
n n n n = 00, 30
: Left justification
n = 01, 31
: Centering
n = 02, 32
: Right justification
n = 03, 33
: Justification
Left justification is selected by default.
ESC b (27)D(98)D (1B)H (62)H
Specifies the vertical tab position in each channel.
m m m (0 ≤m ≤ 7, 1 ≤nk ≤255, 1 ≤k ≤ 16)
n1 n2 n1 n2 n1 n2
This command specifies the vertical tab position in channel m.
••• nk ••• nk ••• nk
A maximum of 16 vertical tab positions can be specified.
NUL NUL NUL
m: Channel number
If m is equal to or more than 8, three bytes of ESC b m are
ignored.
ESC g (27)D(103)D (1B)H (67)H
Selects
15CPI.
Valid when #34 PITCH LOCK is set to NO.
ESC j (27)D(106)D (1B)H (6A)H
Executes reverse feeding at a pitch of
n/180
inch
. (0 ≤n ≤ 255)
nn n
ESC k (27)D(107)D (1B)H (6B)H
Selects the font.
nn n n
Font
(00)H ROMAN
(01)H SANS SERIF
(02)H COURIER
(03)H PRESTIGE ELITE
(04)H SCRIPT
(05)H OCR-B
(06)H OCR-A
(07)H ORATOR
(08)H ORATOR-S
(14)H GOTHIC
●
EPSON Software commands
Decimal Hex
Symbol
Function
Code
8-7
—
8. Software commands
—