Filter
Top Products
9-3
— 9. Software setup functions —
●
Command
HD + @
(1B,7C,60,01,00,40)H
(5) Reset (RESET key)
If the printer is reset without saving data, it enters the
condition set when power was turned on.
HD + G + n
(1B,7C,60,02,00,47,n)H
(6) Printing pressure adjustment
(Setup Function #01)
n=0 Normal
1 Normal
2 Dark 1
3 Dark 2
4 Auto
This command specifies the printing pressure in the
currently selected format memory.
HD + c + m+n
(1B,7C,60,03,00,63,
(7) Head gap adjustment
(Setup Function #02)
m,n)H
When m = 0,3 Auto mode
n=5 Auto:+5click
::
n=1 Auto:+1click
n=0 Auto:0click
n=255 Auto:-1click
n=254 Auto:-2click
When m = 1,4 Fixed mode
n=25 Fix: +25 click
::
n=1 Fix:+1click
n=0 Fix:0click
n=255 Fix:-1click
n=254 Fix:-2click
::
n=251 Fix:-5click
This command specifies the paper pressure in the currently
selected format memory.
When m=0,1: Paper thickness adjustment is performed
after the printing head moves to the specified position.
When m = 3,4: Paper thickness adjustment is performed
when the command is processed and the printing head does
not move.
HD + p + n1 + n2
(1B,7C,60,03,00,70,
(8) TOF position adjustment
(Setup Function #03)
n1,n2)H
00 ≤ n ≤ 63 n = n1 + 256 x n2
TOF: + n/60"
This command specifies the TOF position in the currently
selected format memory.
Hexadecimal
Control code
Corresponding setup function
Code
See page3-8.
See page 3-9.
See page 3-10.