Filter
Top Products
xii
#FB-84008
Cut sheet feeder Rear tractor
For attaching the cut sheet feeder,
see pages 1-22 to 1-26.
For attaching the rear tractor, see pages 1-16 to 1-18.
Print head
#FB-90090
For mounting the print head, refer to the manual
supplied with the print head.
Ribbon cassette
#SBP-1051
For attaching the ribbon cassette,
see pages 1-2 and 1-3.
Current loop interface unit
RS-422A interface unit
#FB-84011#FB-84010
#FB-84009
This unit enables data to be transferred through
an RS-422A interface. This is a built-in unit
that is installed by the dealer. If the RS-422A
interface unit is installed, the RS-232C
interface cannot be used.
This unit converts serial data into 20 mA
current loop signals. This is a built-in unit that
is installed by the dealer. If the current loop
interface unit is installed, the RS-232C
interface cannot be used.
The cut sheet feeder feeds cut sheets automatically
and continuously. A maximum of 150 sheets of
paper (55 kg paper) may be set in the holder of the
cut sheet feeder.
Dual paper parking is available when the rear
tractor is used. Two different types of paper may
be set onto the front and rear tractors and may be
selected by issuing software commands or
pressing the PAPER PATH key to change the
paper paths.
●●
Options and consumables