Filter
Top Products
●
HP Software commands
ESC ) s (27,41,115,#, (1B,29,73,#, Download font descriptor.
# W 87)D 57)H ESC ) s 0 W command resistors a blank LQ font.
DATA DATA DATA The format is as follows.
Symbol set : Byte 14-15 represent the symbol set # and ID for the
download character to be selected by ESC ( # id command.
Example:Roman-8
8U”
32 x 8 + 85 - 64 = 277 (01H,15H)
Point size(character height): Point size in decimal is registered.
Typeface:Parameter used in the typeface selection command is
registered.
LQ/DRAFT:Print Quality, LQ or Draft is registered by the
following definition;
0:DRAFT 1:LQ
ESC * b (27,42,98,#, (1B,2A,62,#, Selects format the graphic data compression.
# M 77)D 4D )H Available in PCL3+ or PCL3+D
Raster graphics data are registered.
# = 0 :compression off
# = 1 :mode 1
# = 2 :mode 2
# = 3 :mode
ESC * b (27,42,98,#, (1B,2A,62,#, Designates raster graphic data transmission.
# W 87)D 57)H
DATA DATA DATA
ESC * b (27,42,98,#, (1B,2A,62,#, Sets temporary graphics X-offset.
# X 88)D 58)H
ESC * b (27,42,98,#, (1B,2A,62,#, Sets temporary graphics Y-offset.
# Y 89)D 59)H
Decimal Hex
Symbol
Function
Code
8-23
—
8. Software commands
—
Byte 0-1 0 0
Byte 2-3 0 0
Byte 3-4 0 0
Byte 5-6 0 0
Byte 7-8 0 0
Byte 9-10 0 0
Byte 10-11 0 0
Byte 12-13 0 0
Byte 14-15 [ SYMBOL SET (2 BYTES)]
Byte 16-17 0 0
Byte 18-19 [ POINT SIZE (2 BYTES)]
Byte 20-21 0 0
Byte 22-23 0 0
Byte 24-25 0 [ TYPEFACE ]
Byte 26-27 0 0
Byte 28-29 [LQ/DRAFT] 0