Filter
Top Products
ESC A (27)D(65)D (1B)H (41)H
Specifies the line feed pitch in n/60 inch.
(0 ≤n ≤ 127)
nn n
ESC B (27)D(66)D (1B)H (42)H
Specifies the vertical tab position.
(1 ≤nk ≤ 255, 1 ≤k ≤16)
n1 n2 n1 n2 n1 n2
This command can specify a maximum of 16 vertical tab
••• nk ••• nk ••• nk
positions.
NUL NUL NUL
ESC C (27)D(67)D (1B)H (43)H
Specifies the page length in number of lines.
(1 ≤n ≤ 127)
nn n
Valid when #32 PAGE LENGTH LOCK is set to NO in the
EXTENDED SETUP MODE.
ESC C (27)D(67)D (1B)H (43)H
Specifies the page length in inches.
(1 ≤ n ≤22)
NUL n NUL n NUL n
Valid when #32 PAGE LENGTH LOCK is set to NO in the
EXTENDED SETUP MODE.
ESC D (27)D(68)D (1B)H (44)H
Specifies the horizontal tab position.
(1 ≤ nk ≤255, 1 ≤ k ≤32)
n1 n2 n1 n2 n1 n2
This command can specify a maximum of 32 horizontal tab
••• nk ••• nk ••• nk
positions.
NUL NUL NUL
ESC E (27)D(69)D (1B)H (45)H
Specifies emphasized printing.
ESC F (27)D(70)D (1B)H (46)H
Cancels emphasized printing.
ESC G (27)D(71)D (1B)H (47)H
Specifies the double striking.
ESC H (27)D(72)D (1B)H (48)H
Cancels the double striking.
ESC J (27)D(74)D (1B)H (4A)H
Executes line feeding at a pitch of n/180 inch.
(0 ≤n ≤ 255)
ESC K (27)D(75)D (1B)H (4B)H
Specifies the 8-dot single-density graphic mode.
n1 n2 n1 n2 n1 n2
Number of data
k= n1 + n2 x 256
d1 d2 d1 d2 d1 d2
Horizontal dot density
: 60 dpi
••• dk ••• dk ••• dk
Maximum dots per line
: 816 dot
ESC L (27)D(76)D (1B)H (4C)H
Specifies the 8-dot double-density graphic mode.
n1 n2 n1 n2 n1 n2
Number of data
k = n1 + n2 x 256
d1 d2 d1 d2 d1 d2
Horizontal dot density
: 120 dpi
••• dk ••• dk ••• dk
Maximum dots per line
: 1632 dot
ESC M (27)D(77)D (1B)H (4D)H
Specifies 12 cpi (elite).
Valid when #34 PITCH LOCK is set to NO in the
EXTENDED SETUP MODE.
ESC N (27)D(78)D (1B)H (4E)H
Specifies the bottom margin.
(1 ≤ n ≤127)
nn n
This command is ignored in the CSF mode.
ESC O (27)D(79)D (1B)H (4F)H
Cancels the bottom margin.
This command is ignored in the CSF mode.
ESC P (27)D(80)D (1B)H (50)H
Specifies 10 cpi.
Valid when #34 PITCH LOCK is set to NO in the EXTENDED
SETUP MODE.
ESC Q (27)D(81)D (1B)H (51)H
Specifies the right margin.
nn n
The right margin cannot exceed the paper width specified with
#4 or #5 in the SETUP MODE.
●
EPSON Software commands
Decimal Hex
Symbol
Function
Code
8-5
—
8. Software commands
—