Filter
Top Products
125Regions and Registers
Chapter 1 DVS-9000 Functions
The reference region is determined according to the following precedence.
M/E1 >M/E2 >M/E3 >P/P >USER1 > USER2 > USER3 > USER4
>USER5 > USER6 > USER7 > USER8 > DME1> DME2 > DME3
> DME4 > P-BUS
Master region
The regions saved in a master snapshot register or master timeline register and
the register numbers saved in such regions can be recalled at a time as the
master region.
The master region can be saved or recalled using the numeric keypad control
block.
Registers
A register is an area of memory in a device which holds a snapshot, keyframe,
and so on.
Keyframe effect registers
Dedicated effect registers
There are 99 dedicated registers for keyframe effects in each region, numbered
1 to 99.
Shared user-programmable DME registers
In addition to the 99 DME registers for each region (i.e. each channel), there
are also shared registers for each processor as shown in the following table.
These are used for user-programmable DME.
Note
When operating with these shared registers, be sure to select the appropriate
regions depending on the number of channels. When recalling registers in the
200 range, select two consecutive channels for the regions, as for example
[DME1] and [DME2].
Work register
This is a temporary register used when editing keyframes.
Register number Register allocation
101 to 199 Shared register for one-channel effects
201 to 299 Shared register for two-channel effects