Filter
Top Products
287Key Setting Operations With the Key Control Block
Chapter 4 Keys
Key Setting Operations With the Key
Control Block
This section describes the basic procedures for key settings using the key
control block.
Key control block
Operations in the Key Control Block
Selecting the bank and keyer
To make key settings, first select the bank (from M/E-1 to M/E-3 and PGM/
PST) and keyer, then assign them to the key control block.
For example, to set key 1 on M/E-1 with the key control block, use the
following procedure.
DME
1
DME
2
DME
3
DME
4
M/E
1
M/E
2
M/E
3
P/P
KEY1 KEY2 KEY3 KEY4 TRANS
LUM LIN CRK CVK PTN
AUTO
SEL
SPLIT
MATTE
FILL
KEY
DROP
SOFT
EDGE
BDR
DROP
BDR
SHDW EMBOS
OUT
LINE
SHOW
KEY
MAIN
MASK
SUB
MASK
ZABTN MORE
MON
FM
FEED
OVER
RIDE
TRACE
PROC
KEY
AUTO
DELEG
DME
5
DME
6
DME
7
DME
8
M/E delegation buttons
Key type selection buttons
Key fill/key source selection buttons
Knobs
Key delegation buttons
Displays
Edge type selection buttons