Filter
Top Products
187Names and Functions of Parts of the Control Panel
Chapter 2 Menus and Control Panel
Device Control Block (Joystick)
All functions of the joystick type device
control block are equivalent to the functions
of the trackball type, except that the
trackball and Z-ring operations are carried
out with the joystick.
a Joystick
By moving this, you can carry out
operations in the x-, y-, and z-axes.
When the effect run control mode is
enabled
By moving the joystick sideways, you can
run the keyframe effect, independent of the
STOP NEXT KF, EFF LOOP, and similar
settings in the keyframe control block.
Move to the right to run the effect in the
normal direction, and to the left for the
reverse direction.
When the VTR/disk recorder operation
mode is enabled
Moving the joystick sideways controls the
tape transport/disk operation, at a speed
determined by the operating buttons. Move
to the right for the normal direction, and to
the left for the reverse direction.
DEVUSER
M/E1
DME1
DME5
MENU
SHIFT
M/E2
DME2
DME6
ASP
PERS
SUB
LOC
SIZE
FMR1
AXIS
LOC
MAIN
LOCAL
K1
CB1
GLB
K2
CB2
CLR
WORK
BUFR
M/E3
DME3
DME7
SRC
K3
FM1
TRGT
K4
FM2
LOC
XYZ
FMR2
X
P/P
DME4
DME8
ROT
POS
Y
Z CTR
RUN
CTRL
Operating buttons
1 Joystick
MENU button
Region selection buttons