Filter
Top Products
283Key Setting Operations Using Menus
Chapter 4 Keys
• When utility 1 bus is selected
5
To invert the black/white sense of the mask source, press the [Mask Invert]
button, turning it on.
Applying a DME Effect to a Key
Assigning a DME to a key
Use the following procedure.
1
In the M/E-1 >Key1 menu, select HF5 ‘Processed Key.’
The Processed Key menu appears.
2
In the <DME Select> group, select the DME channel (DME1 to DME4) to
be used.
The lit colors of [DME1] to [DME4] indicate the DME assignment.
Lit green: Shows the DME assigned to the currently selected key.
Lit amber: Shows the DME assigned to a key other than the currently
selected key.
Off: DME is not assigned.
To select a DME being used by another keyer
Press [Override], turning it on, then select the DME channel.
The later selection is valid, and the button lights green.
Using two or three DME channels on one keyer
Use the following procedure.
1
Select the DME for the first channel (see the previous item, “Assigning a
DME to a key”), then select the successive channel for the second channel.
For the third channel select the channel after that.
2 Soft Edge softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Clip Reference level for creating mask
signal
+109.58 to −7.30
2 Gain Gain −100.00 to +100.00