Sony 9000 Switch User Manual


 
333Basic Procedure for DME Wipe Settings
Chapter 6 DME Wipes
2
Select the desired DME wipe pattern group with one of the following
buttons.
Slide/Squeeze: slide and squeeze
Split/Door: split and door
Flip/Tumble: flip tumble
Page Turn/Roll: page turn and page roll
Frame I/O: frame in/out
P In P: picture-in-picture
User Program: user programmable DME
In two-channel mode, only Slide/Squeeze, P In P and User Program are
selectable.
For details of DME wipe patterns, see “Types of DME Wipe Pattern”
(page 68) and the appendix “DME Wipe Pattern List” (Volume 2).
The patterns from the selected pattern group appear on the screen.
3
Press the button to select the desired pattern.
Note
For a key transition, the page turn, page roll and picture-in-picture cannot
be used.
Selecting a DME wipe pattern in the Flexi Pad control block
In the standard type Flexi Pad control block, enter a 4-digit pattern number,
using the [DME] button.
For details, see “Selecting a wipe pattern in the Flexi Pad control block” (page
306).
Note
You cannot select a DME wipe pattern in the simple type Flexi Pad control
block.
Setting DME Wipe Modifiers
You can apply various modifiers to the DME wipe pattern: setting the DME
wipe direction, pattern position, and so on.
For an overview of the DME wipe modifiers, see “DME Wipe Pattern
Variation and Modifiers” (page 70).