Filter
Top Products
Chapter 5 Wipes
316
Basic Procedure for Wipe Settings
Table 1: Buttons and assigned settings
Table 2: Buttons assigned to functions
2
Press the [MAIN] button or [SUB] button, turning it on.
3
Press the [POS] button, turning Position on.
4
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction. Also, when either of these buttons is lit, you can
enter a coordinate of the wipe position from the numeric keypad.
Rotating the wipe pattern (Rotation)
You can apply rotation independently to the main pattern and sub pattern. Use
the following procedure.
1
In the M/E-1> Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
In the <Rotation> group, select the rotation type.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate at a fixed rate.
Magnitude: Rotate through a particular angle during the course of the
transition.
For an overview of the rotation, see page 61.
Button name Setting
MAIN Wipe position for common transition (main pattern)
SUB Wipe position for common transition (sub pattern)
Button name Function
POS Toggle Position on or off.
X, Y Fix the operating direction, and enable setting of the wipe
position from the numeric keypad.
CTR Return the pattern position to the center of the screen.