Filter
Top Products
317Basic Procedure for Wipe Settings
Chapter 5 Wipes
3
According to the selection in step 2, set the following parameters.
• When Angle is selected
a) See page 61.
• When Speed is selected
a) See page 62.
• When Magnitude is selected
a) See page 62.
Setting the wipe pattern aspect ratio (Aspect ratio)
You can set the aspect ratio independently for the main pattern and sub pattern.
Use the following procedure.
1
In the M/E-1> Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Press [Aspect], turning it on.
3
Set the following parameter.
a) See page 63.
Setting the wipe pattern replication (Multi)
You can set pattern replication independently for the main pattern and sub
pattern.
Use the following procedure.
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Speed Rotation rate of pattern
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation at start of
transition
−100.00 to +100.00
a)
2 Magnitude Angle of rotation through course
of transition
−200.00 to +200.00
a)
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
−100.00 to +100.00
a)