Filter
Top Products
219Basic Menu Operations
Chapter 2 Menus and Control Panel
You can enter a timecode value in the range
that depends on the signal format (page
146) as follows:
00:00:00:00 to 23:59:59:nn,
where nn = (number of frames per
second) – 1.
f – (minus) button
This toggles the sign of the entered value.
When it is pressed, the value is negative.
g Clear button
This clears the input. It does not change the
parameter setting.
h Trim button
After entering the difference from the
current value, press this button to confirm
the numeric input.
i Enter button
This confirms the entered value.