Filter
Top Products
Chapter 1 DVS-9000 Functions
58
Wipes
• A value of 0.00 corresponds to the beginning of the transition, and a value of
100.00 to the end of the transition.
• A negative Start value signifies that the main and sub patterns are already
combined when the transition starts.
• An End value of 100.00 or more signifies that the main and sub patterns are
still combined when the transition complete.
• If the Start and End values are the same, the main and sub patterns are
interchanged instantaneously at the corresponding point in the transition.
• If End is less than Start, as the transition proceeds, it changes from the sub
pattern to the main pattern.
Dust mix
You can apply the effect of a diamond dust wipe to a selected pattern. You can
also apply the diamond dust wipe effect to the pattern resulting from a pattern
mix. (See “Pattern Mix” (page 307).)
When the pattern mix function is off, turning dust mix on results in the main
pattern and the diamond dust pattern being mixed. This state is the same as a
pattern mix when the diamond dust pattern is selected for the sub pattern.
10.00
0.00
–10.00
110.00
100.00
0.00 100.00
90.00
Mix ends during
transition, which
ends with sub
pattern at 100%
Main pattern at 100%
Sub pattern at 100%
Parameter settings
Start: Point in the course of the
transition at which the main pattern
is at 100%
End: Point in the course of the transition
at which the sub pattern is at 100%
Transition (0.00 - 100.00)
Start
value
End
value
Mix combination of
main and sub
patterns already
begun
Ends with sub
pattern at 100%
Begins with main
pattern at 100%
Transition ends
with main and
sub patterns
still in mix
combination
Mix begins after
transition starts