Filter
Top Products
133Keyframes
Chapter 1 DVS-9000 Functions
Paths
The term “path” refers to the specification of how interpolation is carried out
from one keyframe to the next.
For details of the path setting procedure, see “Path Settings” in Chapter 13
(Volume 2).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 to M/E-3, and P/P menus
User1 to User8 menus
The items that can be adjusted depend on the settings in the Setup menu.
For details, see “Overall Control Panel Settings (Config Menu)” in Chapter
16 (Volume 2).
Item Paths that can be set
M/E1 to M/E3, P/P All For each M/E and PGM/PST, path settings for
the following items are made simultaneously.
Key1 to Key4 Overall path settings for items relating to keys
1 to 4 are made simultaneously.
Key 1 All to Key 4 All
Source Key source path for keys 1 to 4
Fill Key fill path for keys 1 to 4
Proc Proc path for keys 1 to 4
Trans Transition path for keys 1 to 4
Bkgd/Util Overall path settings for items relating to
backgrounds and utility buses are made
simultaneously.
Bkgd/Util All
Bkgd A Path for background A
Bkgd B Path for background B
Util 1 Path for utility 1
Util 2 Path for utility 2
Wipe/DME Wipe Overall path settings for items relating to wipes
and DME wipes are made simultaneously.
Wipe Wipe/DME
Wipe All
Wipe Path for wipes
DME Wipe Path for DME wipes
Trans – Transition path for each M/E and P/P bank