Filter
Top Products
Chapter 7 Frame Memory
352
Frame Memory Operations
4
If in step 2 you set [Pair] to be off, press the target FM selection button
[FM1] or [FM2] (see page 349) to select the FM operations apply to.
When [Pair] is on, whichever of FM1 and FM2 you press, the pair is
selected. When off, it is necessary to select which the operations apply to.
Capturing an Image (Freeze)
Freezing an image and writing it to memory
To freeze the signal selected as input material, and write it to memory, use the
following procedure.
1
In the Frame Memory menu, select VF2 ‘Edit’ and HF1 ‘Freeze.’
The Freeze menu appears.
2
Select the target frame memory.
For the procedure, see “Selecting outputs (FM) and target frame
memory” (page 351).
3
To enable V/K mode, press [V/K Mode] turning it on.
4
Press [Freeze Enable], turning it on.
A freeze is now possible.
5
If necessary, make the video process settings (see page 353) or mask
settings (see page 354) for application to the selected signal.
6
In the state in which you want to freeze, press one of the following in the
<Freeze> group, to write the freeze image to temporary memory.
Frame: Freeze one frame.
Field: Freeze one field.
Off: Release the freeze, and delete the recorded freeze image.
After carrying out the freeze, to return to the state immediately before the
freeze, press [Undo] in the <Freeze> group.
Notes
• All freeze images written to temporary memory are lost when the system
is powered off.
• If you change the frame memory to use as in step 2 before saving the
freeze images written to temporary memory, all the freeze images in