Sony 9000 Switch User Manual


 
151Setup
Chapter 1 DVS-9000 Functions
– Recall mode
– Automatically turning off the [EDIT ENBL] button when an effect is
recalled
– Automatic insertion of a first keyframe when an empty register is
recalled
– Effect Auto Save
– Default KF Duration
– Setting whether or not to replay the first keyframe after rewinding a GPI/
P-BUS/DDR/VTR effect
Source/Dest Name: For the Source/Dest (source/destination) names used by
the system, select one of the following:
– Source name set by cross-point assignment or fixed bus name
– Description name set on routing switcher
– “Type + No.” name set on routing switcher
Name Display: Specify the number of characters for display of the names
selected in Source/Dest Name above, as two characters, four characters, or
Auto.
Flexi Pad: Carry out Flexi Pad settings. Specify the delegation selection
coupling, and display mode for the LCD buttons.
Custom Button: Set the following button operation modes.
– [ALL] button for next transition selection
– [AUTO TRANS], [TAKE] or [FTB] button during auto transition
execution
– [RUN] button during keyframe execution
– [UTIL] button
– [TRANS PVW] button
– [XPT HOLD] button in key rows
Sensitivity: Adjust trackball, joystick and double-click sensitivity.
Main Split Fader: When the split fader is active, specify whether the fader
to control other than mix is the left side or the right side.
Screen saver, brightness adjustments, and alarm (Maintenance)
Screen Saver: Make the menu screen saver settings.
LCD Brightness: Adjust the LCD brightness.
LED Brightness: Adjust the LED brightness.
Switch Brightness: Adjust the switch brightness.
Touch Beep: Select whether or not to sound a beep when a menu operation
is carried out.
Touch Panel Calibration: Calibrate the touch panel.
Switcher Setup
In switcher setup, make settings particular to the switcher processor.