Filter
Top Products
Chapter 1 DVS-9000 Functions
162
Macros
Pre-macro: Mode in which the button function is executed after macro
execution has completed
Post-macro: Mode in which the macro is executed after carrying out the button
function
Macro only: Mode in which the button function is not executed, and the macro
only is executed
You can assign any one of the 99 macro registers to a button.
For a button whose function is switched by delegation, you can make a separate
macro attachment for each function.
For each control panel, you can make up to 1000 macro attachment settings.
Notes
• The buttons for which a macro attachment can be made are the background
A and background B rows of buttons in the PGM/PST bank and the M/E
banks only.
• After setting a macro attachment for a cross-point button, if in setup you
change the function assigned to that button (see “Cross-point button settings
(Xpt Assign)” (page 149)), the macro attachment may be canceled.
Enabling and disabling macro attachment
You can temporarily disable the macro attachment settings. When a macro
attachment is disabled, pressing the button does not cause execution of the
assigned macro.
You can enable and disable macro attachments for the PGM/PST bank and M/
E banks individually.
Clearing the macro attachments
You can clear all of the macro attachments in a single operation.