Sony 9000 Switch User Manual


 
Chapter 7 Frame Memory
348
Frame Memory Operations
Frame Memory Operations
For an overview of frame memory concepts, see “Frame Memory” (page 73).
Preparations
Allocating the frame memory outputs (FM1 to FM8) to cross-
point buttons
To output a frame memory image to a monitor, for example, the output signal
from the frame memory (FM1 to FM8) must be allocated to a cross-point
button. Carry out this allocation in the Setup menu.
Accessing the Frame Memory menu
Most frame memory operations are carried out using the Frame Memory menu.
To access the Frame Memory menu, use either of the following procedures.
In the menu control block, select the top menu selection button [FRAME
MEM].
Press the cross-point button to which the frame memory output is allocated
twice in rapid succession.
Interpreting the Frame Memory Menu
The menu screen consists of the following principal parts.
The status area display is the same for all except the Pattern Adjust/Pattern
Select/File menus.