Filter
Top Products
Chapter 7 Frame Memory
354
Frame Memory Operations
Note
When a pair setting is active, it is coupled to the video process on/off
setting, but the above parameter settings are only valid for frame memory
source bus 1. When setting video process for frame memory source bus 2,
disable the pair setting. To set video process for frame memory source bus
1 only with the pair setting, return the frame memory source bus 2 settings
to their default values.
Setting a mask
Masks can be set separately for frame memory source buses 1 and 2. To apply
a mask to the signal selected on frame memory source bus 1, for example, use
the following procedure in the Edit>Freeze menu.
1
Press [Box Mask] turning it on.
2
Use the knobs to adjust the following parameters.
3
To link the masks on frame memory source buses 1 and 2, press [Mask
Link], turning it on.
Recalling Images
Using the thumbnail display to recall an image
To recall an image file saved in memory using the thumbnails, and assign it to
an FM output, use the following procedure.
1
In the Frame Memory menu, select VF1 ‘Recall’ and HF1 ‘Recall
Thumbnail.’
The Recall Thumbnail menu appears.
• When [Pair] is on, only pair files (pairs of main file and sub file) are
displayed.
Knob Parameter Adjustment Setting values
1 Top Top position −100.00 to +100.00
2 Left Left position −100.00 to +100.00
3 Right Right position −100.00 to +100.00
4 Bottom Bottom position −100.00 to +100.00