Filter
Top Products
Chapter 5 Wipes
328
Wipe Snapshots
Flexi Pad control block (simple type)
Saving a Wipe Snapshot
Saving a wipe snapshot
Use the following procedure.
1
Make the wipe settings that you want to save.
2
In the Flexi Pad control block, hold down the [WIPE] button, and press the
memory recall button corresponding to the register in which you want to
save.
Notes
• If you press a button which is lit orange or yellow, the existing contents
of the register are overwritten.
• If you carry out a pattern mix, and both the main pattern and sub pattern
are selected, then the memory recall button shows the main pattern.
WIPE
DME
SNAP
SHOT
UNDO
1 2
3 4
5 6
XPT HOLD
A B
U
1
U
2
1 2 3 4
78
WIPE button
Numeric display
UNDO button
Memory recall buttons