Filter
Top Products
98
Enter “10001” at “Port Number” and
check on “SNMP Status Enabled”.
● “public” is automatically entered for the
“Community Name”, and “1” is entered at the
“SNMP Device Index”. Do not change them.
● Go to Step 15.
13
Select “Raw” or “LPR” under
“Protocol”.
● Raw: The default data type for clients other
than Windows 2000. When printing in
the Raw type, the entire process of
preparing the print job is done on the
client computer.
● LPR: Printing is done through the LPD service.
When printing in the LPR type, the
process of preparing the print job is done
on the print server.
● When “Raw” is selected, go to Step 13.
● When “LPR” is selected, go to Step 14.
12
Enter “PORT1” for the “Queue Name”
and check on “SNMP Status
Enabled”.
● “public” is automatically entered for the
“Community Name”, and “1” is entered at the
“SNMP Device Index”. Do not change them.
14