Filter
Top Products
16
1
Press + on the Dial Keypad
to select BOOTP/DHCP.
TCP/IP
01.BOOTP/DHCP
02.IP ADDRESS
03.SUBNET MASK
2
Press on the Dial Keypad to
select ENABLE.
● If there is a DHCP server on your network and
you do not want use DHCP, press to select
DISABLE.
● The display returns to TCP/IP menu.
BOOTP/DHCP
1.ENABLE
2.DISABLE
3
Press .
● The display returns to NETWORK menu.
TCP/IP
01.BOOTP/DHCP
02.IP ADDRESS
03.SUBNET MASK
4
Press + on the Dial Keypad
to select COMPLETE.
● If you want to cancel the TCP/IP setting, press
.
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
After 2 sec.
NETWORK
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID
After 2 sec.
NETWORK
Initializing
5
The network setting is executing.
● The Initializing message appears. After 2 sec.,
the Operation Completed message appears.
Then, the display returns to the INITIAL SETUP
menu.
● The Network Interface Card begins to initialize.