Filter
Top Products
187
NETPANEL
FUNCTION
➀ TCP/IP Protocol
Select whether to "Enable" or "Disable" network communications using the TCP/IP protocol.
NOTE: It is set to “Enable” as a factory default.
➁ IPX/SPX Protocol
Select whether to "Enable" or "Disable" network communications using the IPX/SPX protocol.
NOTE: It is set to “Enable” as a factory default.
➂ AppleTalk
Select whether to "Enable" or Disable" network communications on an AppleTalk network.
NOTE: It is set to “Disable” as a factory default.
➃ Device Password
The device password is required to save changes. The device password is automatically entered in the field.
➄ [Change Now!]
Click on this to save changes.
NIC Configure
Protocols Configuration
You can operate the following functions by clicking each link on the NIC Configure Display.
➀
➁
➂
➃
➄
After you modify the settings, please perform a "Printer Reset to PowerOn" to enable the new
settings.