Filter
Top Products
23
ASSIGNING
IP ADDRESS
NOVELL SETTINGS
When using the NetWare server for printing, the Novell Settings must be configured to enable
connection to the printer via the IPX/SPX protocol.
1
In Standby Mode, press key.
● The PROGRAM menu is displayed.
2
Press + on the Dial Keypad
to select INITIAL SETUP.
PROGRAM
01.DEFAULT SETTING
02.LISTS
03.INITIAL SETUP
3
Press + on the Dial Keypad
to select NETWORK.
● NETWORK is outside of the Message Display
Panel. Press to display the desired item.
INITIAL SETUP
02.LANGUAGE
03.TERMINAL ID
04.NETWORK
4
Press + on the Dial Keypad
to select NETWARE.
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWARE
01.IPX/SPX
02.FRAME TYPE
5
Press + on the Dial Keypad
to select IPX/SPX.
IPX/SPX
1.ENABLE
2.DISABLE
6
Press on the Dial Keypad to
select ENABLE.
● The display returns to the TCP/IP menu.
NETWARE
01.IPX/SPX
02.FRAME TYPE
7
Press + on the Dial Keypad
to select the FRAME TYPE.
● If you do not have to change the frame type of
the NIC, skip to Step 9.
TIP
“03. TERMINAL ID” appears on the menu only
when the FAX option is installed.