229
TROUBLE-
SHOOTING
Error messages
Please read the instructions in the chapter “NETPANEL FUNCTION”, then try the
following actions with the appropriate error message.
Error Message Displayed Action
Fatal Error on Controller Memory Turn off the power and call for service.
Fatal Error on Controller NVRAM Turn off the power and call for service.
Fatal Error on Memory Turn off the power and call for service.
Fatal Error on Fan Motor Turn off the power and call for service.
Fatal Error on Fuser Turn off the power and call for service.
Fatal Error on Laser Scan Unit Turn off the power and call for service.
Fatal Error on Main Motor Turn off the power and call for service.
Fatal Error on NIC Turn off the power and call for service.
Fatal Error on Flash ROM Checksum Turn off the power and call for service.
Fatal Error on Engine I/F Turn off the power and call for service.
Fatal Error on Finisher Turn off the power and call for service.
Fatal Error on Controller Option Memory Turn off the power and call for service.
Fatal Error Turn off the power and call for service.
Paper Empty in SFB Load paper in SFB (Stack Feed Bypass).
Paper Empty in Cassette1 Load the paper in Cassette 1.
Paper Empty in Cassette2 Load the paper in Cassette 2.
Paper Empty in Cassette3 Load the paper in Cassette 3.
Paper Empty in Cassette4 Load the paper in Cassette 4.
Paper Empty in LCF Load the paper in LCF.
Paper Jam in Bridge Cover Open the Bridge Cover and clear the paper jam.
Paer Jam in Duplex Unit Open the Duplex Unit Cover and clear the paper
jam.
Paper Jam in Ejection Clear the paper jam in the paper exit.
Paper Jam in Engine Inside Open the Front Cover and clear the paper jam.
Paper Jam in Insertion Clear the paper jam in the paper feeding entrance.
Process Unit Not Available Please check process unit.
NIC Card Not Available -
NIC Card Not Ready -
Bridge Cover Open Close the Bridge Cover.
Duplex Unit Cover Open Close the Duplex Unit Cover.
Front Cover Open Close the Front Cover.
Job Separator Cover Open Close the Job Separator Cover.
Side Cover Open Close the Side Cover.
Offset Cover Open Close the Offset Cover.
Finisher Joint Open Join Finisher to Copier.
Standard Output Tray Paper Full Remove the paper from the Standard Output Tray.
Finisher1 Paper Full Remove the paper from the Finisher1.
Finisher2 Paper Full Remove the paper from the Finisher2.