Filter
Top Products
225
MAP
Enter the password.
● The password is “sysadm”.
Enter each field that applies:
Enable AppleTalk Check to use the printer via AppleTalk (Ethernet).
Printer Name Displays the printer name for AppleTalk.
Zone Name Enter the zone name that the printer belongs to.
2
3
Select “Setup AppleTalk” from “Network Administrator” page.
● The AppleTalk Configuration Menu is displayed.
SETUP AppleTalk at MAP
Start MAP, open the AppleTalk setup page, and configure the settings to enable the printer to
operate in the AppleTalk environment.
1
Click on [Accept Setting].
● Click on [Clear Inputs] if your want to cancel your changes and clear the input fields.
4
The entered settings are applied and the message “Update Successful” is
displayed.
5
The Network Interface Card is automatically restarted.
6