Filter
Top Products
31
USING WITH
PEER-TO-PEER
UTILITY
The following shows the procedure to install the peer-to-peer utility for TCP/IP:
31
INSTALLING THE PEER-TO-PEER UTILITY FOR TCP/IP
PREPARATIONS:
● Connect both the e-STUDIO16/20/25 and your computer to the network.
● Turn ON the power to the machine.
● Establish an IP address for the machine.
● Check to see if the “TCP/IP” protocol has been activated on the computer. If not, install
it. To install the protocol, see the Windows HELP menu on the computer.
3
Click on [Setup utilities].
Installation
1
Insert the CD-ROM into the CD-ROM
drive.
● The menu screen appears.
● If the menu screen is not automatically
displayed, or when the Peer-to-Peer Utility for
TCP/IP is installed via the network, double-click
on “TOSHIBA_e-STUDIO16_20_25.exe” in the
Menu folder of the CD-ROM, that may be found
in Windows Explorer.
2
Click on a language of your Operating
System.