Filter
Top Products
26
APPLETALK SETTING
When printing with Macintosh computers, the AppleTalk Setting must be configured to enable
connecting to the machine via the AppleTalk protocol.
1
In Standby Mode, press key.
● The PROGRAM menu is displayed.
2
Press + on the Dial Keypad
to select INITIAL SETUP.
PROGRAM
01.DEFAULT SETTING
02.LISTS
03.INITIAL SETUP
3
Press + on the Dial Keypad
to select NETWORK.
● NETWORK is outside of the Message Display
Panel. Press to display the desired item.
INITIAL SETUP
02.LANGUAGE
03.TERMINAL ID
04.NETWORK
4
Press + on the Dial Keypad
to select APPLE TALK.
● APPLE TALK is outside of the Message Display
Panel. Press to display the desired item.
NETWORK
02.TCP/IP
03.NETWARE
04.APPLE TALK
ETHER TALK
1.ENABLE
2.DISABLE
6
Press on the Dial Keypad to
select ENABLE.
● The display returns to the ETHER TALK menu.
APPLE TALK
01.ETHER TALK
5
Press + on the Dial Keypad
to select ETHER TALK PROTOCOL.
7
Press .
● The display returns to the NETWORK menu.
APPLE TALK
01.ETHER TALK
TIP
“03. TERMINAL ID” appears on the menu only
when the FAX option is installed.