Filter
Top Products
44
NetWare 3.x SETUP
When using with NetWare 3.x this machine is set up by using PCONSOLE.
Set-up Example
NOTES:
Set up in the print server mode. The Remote Printer Set-up cannot be used.
The following example is performed under the conditions stated below. Check the conditions of
the environment you are using.
<Server>
• NetWare server name : NWSRV (They must correspond with the names to be set for the
printer using MAP.)
<Contents to be set>
Name the following as desired.
• Print queue name : TOS_QUE
• Printer name : TOS_PRN
• Print server name : TOS_SRV (They must correspond with the names to be set for
the printer using MAP.)