Filter
Top Products
180
➀ Select Default Output Bin
Select the default Output Bin.
➁ Select Offset Stacker Mode
Select ON when the Offset Stacker function is used for printing. This is available only when the Offset Stacker is
installed. If not, a “Module not installed” message is displayed.
➂ Select Duplex Mode
Select ON when the Duplex function is used for printing. This is available only when the Duplex Unit is installed. If
not, a “Module not installed” message is displayed.
➃ Device Password
The device password is required to save changes. The device password is automatically entered in the field.
➄ [Change Now!]
Click on this to save changes.
Output Bin Properties
➀
After you modify the settings, please perform a "Printer Reset to PowerOn" to enable the new
settings.
➁
➂
➃
➄