Filter
Top Products
36
INSTALLING THE PEER-TO-PEER UTILITY FOR IPX/SPX
PREPARATIONS:
● The printer must be enabled to use NetWare. Ask your administrator for more details.
● Connect both the printer and your computer to the network.
● Turn ON the power to the machine.
● Check if any “IPX/SPX compatible protocol” has been installed on your Windows OS
computer. If not, install it.
1
Insert the CD-ROM into the CD-ROM
drive.
● The menu screen appears.
● If the menu screen is not automatically
displayed, or when the Peer-to-Peer Utility for
IPX/SPX is installed via the network, double-click
on “TOSHIBA_e-STUDIO16_20_25.exe” in the
Menu folder of the CD-ROM, which may be
found in Windows Explorer.
3
Click on [Setup utilities].
NOTE:
When using the peer-to-peer utility for IPX/SPX where no NetWare server is on the
network, it is recommended that you change the frame type of the IPX/SPX-compatible
protocol installed on your computer. Open the properties dialog for the IPX/SPX-
compatible protocol and change the frame type to “Ethernet 802.3.”
Installation
The following shows the procedure to install the peer-to-peer utility for IPX/SPX.
2
Click on a language of your Operating
System.