Filter
Top Products
88
Windows NT PRINT SERVER SETUP
Preparation for Setting up
Confirming the TCP/IP Print Services
Create a shared printer on the Windows NT server so that clients can install the printer driver
from Windows NT server and print a document through the Windows NT server.
When using Windows NT as the print server, utilize the Microsoft TCP/IP Printing services.
Check the following before set up:
• The e-STUDIO16/20/25 and the computer are connected to the network.
• The printer is powered up.
• The printer has been configured with an IP address.
• The TCP/IP protocol and Microsoft TCP/IP Printing Service are installed on Windows NT.
Choose [Control Panel].
Click on [Start] and choose [Settings].
Click on the Services tab.
Double-click on [Network].
Check that “Microsoft TCP/IP
Printing” is displayed on Network
Services. If not, install it.
● For installation procedures, refer to the
Operator’s Manual for Windows NT and Help.
1
2
3
4
5